Hire - ALTO PRO STEALTH WIRELESS STEREO SYSTEM FOR ACTIVE LOUDSPEAKERS

Regular price $90.00 Sale

Simple Setup
First, Connect the transmitter. Plug the main outputs of your mixer or DJ controller into the Stealth Wireless transmitter, using either the XLR or 1/4" inputs.

Next, Connect the receivers. Take the XLR output on the Stealth Wireless Receiver and connect it to the input of your active loudspeaker, or to the input of your amplifier/speaker combination. Repeat this step for the second receiver.

Turn the transmitter on first, and then the receivers. It’s that easy. Select any one of the 16 reliable UHF channels to minimize interference. The squelch control can be manually set to one of three levels for optimal performance. As your needs change, you can add more receivers to your system with the Stealth Wireless Expansion Pack.


Specifications:

STEREO WIRELESS SYSTEM FOR ACTIVE LOUDSPEAKERS
Add wireless audio connectivity to any active loudspeaker
Enjoy faster setups and teardowns
Eliminate complex cable runs
Dual-channel transmitter (x1) with two XLR+1/4
Single-channel receivers (x2) with one XLR output (per unit)
Replaces up to 200' of console-to-system cabling
No compromise in audio quality
Reliable UHF band; 16 selectable channels
Adjustable squelch eliminates interference
Grow your system using the Stealth Wireless Expander Pack* (sold separately)
Transmitter: (2) XLR+1/4 combo inputs
Receiver: (1) XLR output (per receiver)

TRANSMITTER
Type: Dual Channel Transmitter
RF Frequency: 540 - 570 MHz
Oscillation Type: PLL
Preset Channels: 16 Channels (stereo)
Frequency Response: 50 Hz ~ 17 kHz / 3dB
Bandwidth: 24 MHz or 30MHz
Frequency Stability: 0.005%
Frequency Deviation: 20 kHz
LED Indicators: Power On/Off, Sig/Clip
Power External Adaptor, 12 VDC/300 mA
Output Power: <10 mW
Controls: Power Switch; Channel Select; Mono/Stereo Switch
Dimensions: 6.32 x 5 x 4 inches (with antennae)
Weight: 10.2 ounces (290 grams)

RECEIVER
Type: Single Channel Receiver
Preset Channels: 16 Channels
RF Frequency: 610 - 640 MHz
S/N Ratio: >100 dB/A
RF Sensitivity: -100 dBm
Image Rejection: >70 dB
T.H.D.: < 0.5% ﹫1kHz
LED Indicator: Power On, RF/AF LED Indicator
AF output Impedance: 660Ω balanced
Squelch: 3-step & Pilot Tone
Operation Voltage: 12 VDC,300 mA
Dimensions: 4.58 x 2.74 x 1.24 inches (with antennae
Weight (each): 4.15 ounces (117.7 grams)

EQUIPMENT - SET-UP & PACK-DOWN
When you hire from us you can select to use our Setup Service and have us set up the equipment for you. The equipment will be set up in the most efficient manner to suit the event. Total Setup service time cannot exceed half an hour, this is ample time for our trained technician to set up the equipment in a suitable manner for the event. For customised set ups an additional charge of $49 per 30 minutes will apply. Customised set up usually applies to situations were cable runs are long and require extensive labour to conceal and "make safe". If you require a band set up, you will need to book an operator as this type of set up requires higher qualified technician.Note that Sunday labour incurs an additional charge, please contact us to obtain a quote on Sunday labour.