Hire - Rode Filmmaker Kit RODELink
Hire this RodeLink Wireless Filmmaker Kit provides everything you need to start shooting video wirelessly, including a receiver, transmitter and broadcast-grade lavalier microphone,
The RodeLink Wireless Filmmaker Kit from Rode is a wireless system for film and video production that features a transmitter, receiver, and an included lavalier microphone. The system utilizes a Series II 2.4 GHz 128-bit encrypted digital transmission signal that constantly monitors and hops between frequencies to select the strongest signal. The kit offers a high signal-to-noise ratio and provides a high-resolution 24-bit 44.1 kHz digital transmission of lossless audio at a range of up to 100m.
The beltpack transmitter features a simple 3-stage gain adjustment and a mute lock function to prevent accidental muting. A locking 3.5mm input audio connector ensures body worn microphones remain secure. The camera mount receiver features a removable shoe mount enabling it to be used on camera or as a belt pack receiver. A mute override function gives complete control to the operator, while mute status, input level, and battery status for both the transmitter and receiver are displayed on the front of the unit. The receiver also utilizes the same locking 3.5mm connector as the transmitter to provide solid security.
Both the beltpack transmitter and camera mount receiver can be powered by any USB power source using a standard micro-USB cable. The system offers eight discrete channels that can easily be set up in seconds with over 8000 different channel combinations available. Channel selection and pairing is achieved with a one-press operation and automatic scanning, which significantly reduces setup times when compared to traditional UHF setups.
- Series II, 2.4GHz digital transmission
- 128-bit encryption
- Up to 100 metres range
- OLED display (on receiver)
- One button pairing
- Three level gain control
- AA battery or USB powered
- Includes Rode’s broadcast Lavalier microphone
EQUIPMENT - SET-UP & PACK-DOWN
When you hire from us you can select to use our Setup Service and have us set up the equipment for you. The equipment will be set up in the most efficient manner to suit the event. Total Setup service time cannot exceed half an hour, this is ample time for our trained technician to set up the equipment in a suitable manner for the event. For customised set ups an additional charge of $49 per 30 minutes will apply. Customised set up usually applies to situations were cable runs are long and require extensive labour to conceal and "make safe". If you require a band set up, you will need to book an operator as this type of set up requires higher qualified technician.Note that Sunday labour incurs an additional charge, please contact us to obtain a quote on Sunday labour.